HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.51/3.60 User Guide

Command line 40
Item Description
Displays a summary of all interconnect modules
->show interconnect *
Displays detailed information for all interconnect modules
->show interconnect *:5
Displays detailed information for all enclosures with interconnect modules in
interconnect bay number 5
->show interconnect enc0:*
Displays interconnect modules in all bays of a specific enclosure
->show interconnect enc0:3
Displays detailed information on a specific interconnect module in interconnect
bay 3 of the primary enclosure
interconnect-mac-table
Display interconnect module MAC table information.
Supported actions: help, show
Item Description
show interconnect-
mac-table
Display interconnect module MAC table information for the specified module.
Syntax
show interconnect-mac-table <ModuleID>
Parameter
ModuleID (required)
The ID of the module for which to display the MAC table. The ID is in the format
of
<EnclosureID>:<BayNumber>
.
Examples
->show interconnect-mac-table enc0:1
Displays the module MAC table for the module in bay 1 of enclosure enc0
->show interconnect-mac-table enc0:1 Port=d5
Displays only MAC addresses associated with the specified port for the module
in bay 1 of enclosure enc0
->show interconnect-mac-table enc0:1 "MAC
Address=00:50:56:4C:6E:39"
Displays which port(s) the MAC address is learned on for the module in bay 1 of
enclosure enc0
iscsi-boot-param
Manage iSCSI boot parameters within a domain.
Supported actions: help, remove, set, show
Item Description
remove
iscsi-boot-param
Remove all iSCSI boot parameters configured on the specified iSCSI
connection.
Syntax
remove iscsi-boot-param <ConnectionID>
Parameter
ConnectionID
(required)
The ID of an existing iSCSI connection. The ID format is <ProfileName:Port>. To
retrieve the port number of the iSCSI connection, use the show profile
<ProfileName>
command.