HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.70/3.75 User Guide

Introduction 8
Command Changes Virtual Connect 3.60 Virtual Connect
3.70/3.75
help connection-map
show connection-map
The new object
"connection-map" is
supported in VC 3.70,
enabling you to display
server-to-target connectivity
information for servers with
assigned profiles
containing DirectAttach
fabrics.
Not supported
All of these commands
are supported.
add fabric
The "Type" property was
added to this command,
enabling you to specify the
fabric type, either
FabricAttach or
DirectAttach, for FlexFabric
modules.
Not supported
add fabric <Name>
Bay=<BayNum>
Ports=
<PortList>
[Type=
<FabricAttach|
DirectAttach>]
set igmp
The "NoFlood" property
was added to this
command, enabling you to
allow or prevent the
flooding of unregistered
multi-cast packets.
set igmp
[Enabled=<true|f
alse>] [Timeout=
<interval>]
set igmp
[Enabled=<true|f
alse>] [Timeout=
<interval>]
[NoFlood=<true|f
alse>]
help local-users
set local-users
show local-users
The new object local-users
is supported in VC 3.70,
enabling users with domain
privileges to modify the
local user authentication
settings for the VC domain.
Not supported All of these commands
are supported.
help name-server
show name-server
The new object
"name-server" is supported
in VC 3.70, enabling you
to display a snapshot of all
hosts and direct attached
storage devices for the
specified FlexFabric
module.
Not supported All of these commands
are supported.
add snmp-access
help snmp-access
remove snmp-access
show snmp-access
The new object
"snmp-access" is supported
in VC 3.70, enabling you
to manage SNMP access.
Not supported
All of these commands
are supported.
show ssl-certificate *
This command now shows
new data fields when they
are set in the installed
certificate.
Hardcoded default
values are displayed
for some fields.
User-specified values
displayed for all
necessary fields when
they are set in the
installed certificate