HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.70/3.75 User Guide

Command line 83
Item Description
add server-port-map
Add a new server port network mapping, and allow server ports to be shared
among multiple VC Ethernet networks.
Syntax
add server-port-map <ConnectionId> <Network Name>
[Uplinkset=<Uplink Set Name>] [VLanID=<VLan ID>]
[Untagged=<true|false>]
Parameters
ConnectionID
(required)
The ID of an existing Ethernet connection associated with a profile and a server
port. The format of the ConnectionID is
<ProfileName:PortNumber>
.
Network (required)
The name of a valid network to which the mapping is added. A network can be
configured once for every profile connection, and every profile connection can be
configured for a maximum of 28 networks.
Properties
Uplinkset (optional)
The name of the shared uplink set to use with the server port mapping. If the domain
setting SharedServerVLanId is set to "true", Uplinkset is a required value.
VLanID (optional)
The VLAN ID to use for the mapping. Valid values include 1 to 4094. If the uplink
set name is specified, the VLanID property should not be specified, because the
server VLAN ID is forced to be same as the VLAN ID used when adding the network
to the shared uplink set.
Untagged (optional)
Enables or disables the network to handle untagged packets. Only one network in
an Ethernet network connection can handle untagged packets. The default value is
"false". If a shared uplink set is used, the untagged network is the same as the native
network, if present, but any other network can be configured to handle untagged
packets.
Examples
->add server-port-map MyProfile:1 Network1 VLanID=100
Adds a new server port to dedicated network mapping
->add server-port-map MyProfile:2 RedNetwork
Uplinkset=MyUplinkSet1
Adds a new server port to shared network mapping
->add server-port-map MyProfile:3 GreenNetwork
Uplinkset=MyUplinkset1 UnTagged=true
Adds a new server port to shared network mapping and enables untagged packet
handling
Item Description
remove
server-port-map
Remove a server port network mapping.
Syntax
remove server-port-map <ConnectionID|*> [<Network Name>]
Parameters
ConnectionID
(required)
The ID of an existing Ethernet connection associated with a profile and a server
port. The format of the ConnectionID is <ProfileName:PortNumber>. Use "*"
to remove all server-port-map configurations from the domain.
Network (optional)
The name of an Ethernet network on which the mapping exists
Examples
->remove server-port-map MyProfile:1 RedNetwork
Removes a server port network mapping
->remove server-port-map MyProfile:1 *
Removes all server port network mappings from a profile
->remove server-port-map *
Removes all server port mappings in the domain