HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.70/3.75 User Guide

Command line 90
Item Description
attributes:
DomainCategories=DomainStatus
Severity=Info
Syntax
test snmp-trap
Example
->test snmp-trap
Generates an SNMP test trap and sends it to the configured destinations
ssh
Manage SSH configuration and information.
Supported actions: help, load, remove, show
Item Description
load ssh
Transfer the SSH key from a remote FTP server and apply it to the Virtual Connect
domain. A customized SSH key enables additional security for SSH clients that are
allowed to access the domain configuration. If a new custom SSH key is applied, the
SSH clients must be configured correctly to have access.
This command loads an SSH key for the current user only. Other VC users are not able
to use the same SSH key to authenticate. This command is only valid for local VC users
(no LDAP, TACACS+, or RADIUS users).
Syntax
load ssh Address=<ftp://user:password@IPv4Address/filename>
-or-
load ssh Address=<ftp://user:password@ipaddress>
Filename=<name>
Properties
Address
(required)
The IPv4 address or host name of an FTP server, with user name, password, and remote
file containing the SSH keys to transfer.
Filename
(required)
The name of the remote file containing the SSH keys to transfer. The filename can also
be mentioned separately.
The file path given will be treated as relative to the login directory for the user on the FTP
server. The user should ensure that the permissions are appropriate for the transfer to
succeed.
Examples
->load ssh Address=ftp://user:password@192.168.10.12/
ssh_key.pub
Transfers the SSH key from the remote FTP server
->load ssh Address=ftp://user:password@192.168.10.12
Filename=/ssh_key.pub
Transfers the SSH key from the remote FTP server
Item Description
remove ssh
Remove any custom SSH keys that have been applied.
Syntax
remove ssh
Example
->remove ssh
Removes SSH keys