HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.20 User Guide

Command line 115
snmp-trap
Manage SNMP trap information.
Supported actions: add, help, remove, set, show, test
Item Description
add snmp-trap
Adds a new SNMP trap destination.
You can configure up to five VC-Enet and five VC-FC SNMP trap destinations.
Avoid using duplicate trap destinations. Setting duplicate trap destinations can
result in duplicate traps being sent to the same destination, or only one of the trap
destinations being configured.
Syntax
add snmp-trap <Name> Address=<IPAddress|DNSname>
[Community=<community name
string>][Format=<SNMPv1|SNMPv2>][Severity=<trap
severity|All|None>][DomainCategories=<domain trap
category|All|None>][EnetCategories=<enet trap
category|All|None>][FcCategories=<fc trap
category|All|None>]
Parameter
Name (required)
A unique name for the new trap being added
Properties
Address (required)
IP address or DNS name for the trap destination
Community (optional)
The SNMP community name string for the specified trap. If not specified, the default
value is "public". For VC-Enet modules, the maximum string length is 39. For VC-FC
modules, the maximum string length is 24.
Format
Format of the new trap. Values are "SNMPv1" and "SNMPv2". If not specified, the
default is "SNMPv1".
Severities
Trap severities to send to the destination. Values are "Normal", "Unknown", "Info",
"Warning", "Minor", "Major", "Critical", "All", and "None". Multiple severities
can be specified, separated by commas. The default severity is "None".
DomainCategories
The VC domain trap categories to send to the destination. Values are "Legacy",
"DomainStatus", "NetworkStatus", "FabricStatus", "ProfileStatus", "ServerStatus",
"EnetStatus", FcStatus", "All", and "None". Multiple categories can be specified,
separated by commas.
EnetCategories
The VC Ethernet trap categories to send to the destination. Values are "PortStatus",
"PortThreshold", "Other", "All", and "None". Multiple categories can be specified,
separated by commas.
FcCategories
The VC Fibre Channel trap categories to send to the destination. Values are
"PortStatus", "Other", "All", and "None". Multiple categories can be specified,
separated by commas.
Examples
->add snmp-trap EnetManagementStation Address=192.112.34.10
Community=private Format=SNMPv1 Severity=Normal,Critical
EnetCategories=Other
Adds a new trap destination for VC-Enet modules
->add snmp-trap FcManagementStation Address=192.112.72.3
Community=private Format=SNMPv1 FcCategories=Other
Adds a new trap destination for VC-FC modules
->add snmp-trap MyTrap Address=192.112.66.12
Adds a new trap using typical defaults
->add snmp-trap MyTrap Address=2001:05c0:9168::1
Severity=All EnetCategories=All
Adds a new trap destination using an IPv6 address