HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.20 User Guide

Command line 32
Item Description
Examples
->show enclosure
Displays a summary of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure
enet-connection
Manage Ethernet network connections.
Supported actions: add, help, remove, set, show
Item Description
add enet-connection
Add a new Ethernet network connection to an existing server profile.
The maximum number of Ethernet connections that can be added to a
server profile is 128.
Syntax
add enet-connection <ProfileName>
[Network=<NetworkName>][McastFilter=<McastFilterName
>|McastFilterSet=<McastFilterSetName>]
[PXE=<enabled|disabled|UseBios>]
[AddressType=<Factory-Default|User-Defined|Pool-Spec
ified>] [EthernetMAC=<MAC Address> iScsiMAC=<MAC
Address>] [SpeedType=<Auto|Preferred|Custom|
Disabled>] [Speed=<speed>]
Parameter
ProfileName (required)
The name of an existing profile to which the new connection is added
Properties
Network (optional)
The name of an existing network to associate with the connection. If the
network name is not specified, or is set to "unassigned", the network
remains unassigned and can be assigned later.
PXE (optional)
Enables or disables PXE on the network connection. Valid values are
"enabled", "disabled", and "UseBios". If not specified, the default is
"UseBios".
Only one connection can have PXE enabled per profile.
McastFilter (optional)
The name of an existing Multicast Filter to associate with the connection if
the Multicast Filter name has not been specified. If the name is not
specified, or is set to "None", then the Multicast Filter is left unassigned
and can be assigned later.
McastFilterSet (optional)
The name of an existing Multicast Filter Set to associate with the
connection if the Multicast Filterset name has not been specified. If the
name is not specified, or is set to "None", then the Multicast Filter Set is left
unassigned and can be assigned later.
AddressType (optional)
The source of MAC address assignments to be used during the creation of
the new connection. If not specified, the default is the domain default. If
"User-Defined" or "Pool-Specified" is specified, both an Ethernet MAC
Address and iSCSI MAC Address must also be specified. Valid values
include "Factory-Default", "User-Defined" and "Pool-Specified".
IMPORTANT: "User-Defined" addresses within the domain address pool
range are permanently depleted from the pool and can only be re-used as
"User-Defined". Deleting the profile does not return the address to the