HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.20 User Guide

Command line 42
Item Description
->set fabric MyFabric5 -loadBalance
Performs load balancing on a fabric with manual login re-distribution
->set fabric MyFabric4 PrefSpeedType=Custom PrefSpeed=4000
MaxSpeedType=Custom MaxSpeed=8000
Modifies the fabric to preferred connection speed of 4Gb and maximum connection
speed of 8Gb
Item Description
show fabric
Display all fabric information.
Syntax
show fabric [<FabricName>|*]
Parameter
Name (optional)
Name of an existing fabric. Use “*” to display a detailed output of all fabrics in the VC
domain. If not specified, a summary output of all fabrics appears.
Examples
->show fabric
Displays a summary of all FC SAN fabrics
->show fabric *
Displays detailed information for all FC SAN fabrics
->show fabric SAN_5
Displays detailed information for a specific FC SAN fabric
fc-connection
Manage Fibre Channel SAN connections.
Supported actions: add, help, remove, set, show
Item Description
add fc-connection
Add a new FC SAN connection to an existing server profile.
For more information, see "General requirements for adding FC or FCoE
connections (on page 191)."
Syntax
add fc-connection <ProfileName> [Fabric=<FabricName>]
[Speed=<Auto|1Gb|2Gb|4Gb|8Gb|Disabled>]
[AddressType=<Factory-Default|User-Defined|Pool-Specifie
d>] [PortWWN=<WWN address>] [NodeWWN=<WWN address>]
Parameter
ProfileName (required)
The name of an existing profile to which the new connection is added
Properties
Fabric (optional)
The name of an existing fabric to associate with the connection. If the fabric
name is not specified, the connection is marked as “Unassigned” and
associated with a specific bay.
Speed (optional)
The port speed of the connection port. Values include "Auto", "1Gb", "2Gb",
"4Gb", "8Gb", and "Disabled". If not specified, the default port speed is set to
"Auto".
Speed restrictions:
For the HP VC 4Gb FC Module, supported speed values include
"Auto","1Gb","2Gb", "4Gb", and "Disabled". If the value is set to 8Gb, the
speed is auto-negotiated by VC.
AddressType (optional)
The source of WWN address assignments used during the creation of the new
connection. If not specified, it defaults to the domain default. If "User-Defined"
or "Pool-Specified" is specified, then both a Port WWN and Node WWN must