HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.20 User Guide

Command line 54
Item Description
TargetPort2 (required
if TargetIP2 is
specified)
The TCP port associated with the alternate target IP address. The default value is
3260.
Authentication
(optional)
The initiator and target must agree on an authentication method, or the iSCSI
initiator cannot log in to the target. Supported values include "None", "CHAP",
and "CHAPM". The default value is "None".
Username (required if
authentication type is
CHAP or CHAPM)
The user name for authentication. The user name length is a maximum of 223
characters. If the name contains non-alphanumeric characters, it must be
enclosed in quotation marks.
Secret (required if
authentication type is
CHAP or CHAPM)
The secret password for CHAP and CHAPM authentication. It is specified as a
string or a long hex value (starting with 0x). This value must be at least 96 bits
(12 bytes, 24 hex digits) and at most 128 bits (16 bytes, 32 hex digits) long.
The CHAP secret password can be entered as clear text in the command or as
a masked string at the prompt.
MutualUsername
(required if
authentication type is
CHAPM)
The mutual user name for CHAPM authentication. The user name length is a
maximum of 223 characters. If the name contains non-alphanumeric
characters, it must be enclosed in double quotation marks.
MutualSecret (required
if authentication type
is CHAPM)
The mutual secret password for CHAPM authentication. The password should
be specified as a string or a long hex value (starting with 0x). This value must be
at least 96 bits (12 bytes, 24 hex digits) and at most 128 bits (16 bytes, 32 hex
digits) long. The mutual secret password can be entered as clear text in the
command or as a masked string at the prompt.
ISCSIBootParamDHCP
(optional)
Enables the iSCSI option ROM to retrieve the iSCSI boot parameters from DHCP
or through static configuration. Values are "Enabled' and "Disabled". The
default value is "Disabled", which enables static configuration.
NetworkParamDHCP
(optional)
Enables the iSCSI option ROM to retrieve the TCP/IP parameters from DHCP or
through static configuration. Values are "Enabled" and "Disabled'. The default
value is "Disabled", which disables DHCP and enables static configuration.
DHCPVendorID (required
if ISCSIBootParamDHCP
is "Enabled")
The string used to match the value in the Vendor Class ID field in the DHCP offer
packet when retrieving iSCSI boot parameters.
Examples
->set iscsi-boot-param MyProfile1:1 BootOrder=Primary
Lun=100
InitiatorName="iqn.2009-09.com.someorg.iSCSI-Initiator"
InitiatorIp=192.128.3.1 Mask=255.255.0.0
TargetName="iqn.2009-09.com.someorg.iSCSI-Target"
TargetIp=192.128.3.2 TargetPort=40000 Authentication=CHAP
Username=SomeUserName Secret=SomePassword123
Configures basic boot attributes on an iSCSI connection of profile MyProfile1
->set iscsi-boot-param MyProfile1:1 BootOrder=Primary
ISCSIBootParamDHCP=Enabled NetworkParamDHCP=Enabled
DHCPVendorID=SomeVendorIDValue
Configures iSCSI Boot attributes to be retrieved from DHCP