HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.20 User Guide

Introduction 8
Command Changes Virtual Connect 4.10 Virtual Connect 4.20
add port-monitor
remove port-monitor
set port-monitor
Modified the
commands to include
QSFP+ uplink ports in
the AnalyzerPort
property
add port-monitor
[AnalyzerPort=<Por
tID>]
[Speed=<Auto|10Mb|
100Mb|1Gb|10Gb|Dis
abled>]
[Duplex=<Auto|Half
|Full>]
[MonitorPort=<Port
ID>]
[Direction=<ToServ
er|FromServer|Both
>]
where the format of the
network analyzer
<PortID> is
<EnclosureID>:<Int
erconnectBay>:<Por
tNumber>
add port-monitor
[AnalyzerPort=<Por
tID>]
[Speed=<Auto|10Mb|
100Mb|1Gb|10Gb|40G
b|Disabled>]
[Duplex=<Auto|Half
|Full>]
[MonitorPort=<Port
ID>]
[Direction=<ToServ
er|FromServer|Both
>]
where the format of the
network analyzer
<PortID> is
<EnclosureID>:<Int
erconnectBay>:<Por
tNumber>.
For QSFP+ ports, the
<PortNumber> format is
Q<x>.<y>
.
add port-monitor
set port-monitor
add uplinkport
set uplinkport
Modified the
commands to include
the "40Gb" speed
type
[Speed=<Auto|10Mb|
100Mb|1Gb|10Gb|Dis
abled>]
[Speed=<Auto|10Mb|
100Mb|1Gb|10Gb|40G
b|Disabled>]
show config
The
includePoolInfo
option provides
VC-defined
addresses and
user-defined
addresses for
profiles, to be used to
restore the profiles
while maintaining the
pool-specified IDs.
Not available Available
add profile
add enet-connection
add fc-connection
add fcoe-connection
add iscsi-connection
The
PoolSpecified
option supports
creating a profile and
its connections with
pool-specified
addresses, if
available in the
specified domain
pool.
Not available Available
show interconnect
The
-fip_snooping
option displays FIP
snooping information
for the specified
interconnect module.
Not available Available