HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 4.20 User Guide

Command line 88
Item Description
-NoDefaultFcConn -NoDefaultFcoeConn
Creates a new profile without adding default Ethernet, FC, and FCoE connections
->add profile MyNewProfile2 Nag=DatabaseNetGroup
Creates a new profile and associates it with the DatabaseNetGroup network
access group
->add profile MyNewProfile2 HideUnusedFlexNICs=true
Does not enumerate FlexNICs not assigned to a profile as network interfaces in the
operating system
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121
Creates a new profile and specifies a custom virtual serial number
->add profile MyNewProfile SNType=Pool-Specified
SerialNumber=VCX0113121
Creates a new profile and specifies an address from the VC-defined or user-defined
pool
->add profile MyNewProfile SNType=Factory-Default
Creates a new profile and uses the factory assigned serial number
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121
UUID=15713c60-fcf2-11dc-a656-0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile
Assign a server profile to a device bay.
Syntax
assign profile <ProfileName> <DeviceBay> [-PowerOn]
Parameters
ProfileName
(required)
The unique name of the server profile.
DeviceBay (required)
The device bay to assign the profile. Format:
<EnclosureID>:<DeviceBayNumber>. If EnclosureID is not specified, the
default is the local enclosure. To assign a profile to a multi-blade server,
<DeviceBay> must be the monarch bay.
Option
PowerOn
Powers on the server after the profile is assigned
Examples
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
->assign profile MyProfile1 enc0:5
Assigns a profile to a multi-blade server in bays 5-8 of the primary enclosure
Item Description
copy profile
Copy an existing profile configuration to another profile. The copied profile
(destination profile) is left unassigned.
Syntax
copy profile <src_profile_name> <dest_profile_name>
Parameter
src_profile_name
(required)
The name of the profile from which the configuration is being copied
dest_profile_name
(required)
The name of the profile to which the configuration is being copied
Example
->copy profile_server1 profile_server_new