HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide

Command line 30
Item Description
->add fc-connection MyNewProfile AddressType=User-
Defined PortWWN=50:06:0B:00:00:C2:62:00
NodeWWN=50:06:0B:00:00:c2:62:01
Adds a new FC SAN connection and provides user-defined WWN addresses
Item Description
remove fc-connection
Remove the last FC connection from an existing server profile.
Syntax
remove fc-connection <ProfileName>
Parameter
ProfileName (required)
The name of an existing profile from which the last FC connection is to be
removed.
Example
->remove fc-connection MyProfile
Removes an FC connection from a profile
Item Description
set fc-connection
Modify an existing server profile connection.
Syntax
set fc-connection <ProfileName> <Port>
[Fabric=<FabricName>]
[Speed=<Auto|1Gb|2Gb|4Gb|8Gb|Disabled>]
[BootPriority=<priority>] [BootPort=<portName>]
[BootLun=<LUN>]
Parameters
ProfileName (required)
The name of the server profile that contains the connection to modify
Port (required)
The port number of the connection being modified
Properties
Fabric (optional)
The name of the FC SAN fabric to associate with the connection. The fabric
being specified should be associated with the same bay as the FC
connection.
Speed (optional)
The port speed of the FC SAN connection. Valid values include "Auto",
"8Gb", "4Gb", "2Gb", "1Gb", and "Disabled".
Speed restrictions:
For the HP 4Gb VC-FC Module and HP Virtual Connect 4Gb FC Module,
valid speed values include "Auto","1Gb","2Gb", and "4Gb", and
"Disabled".
BootPriority
(optional)
Controls whether the FC HBA port is enabled for SAN boot and affects the
BIOS boot order. Valid values include "BIOS", "Primary", "Secondary", and
"Disabled".
BootPort (optional)
The target WWPN of the controller interface on the Fibre Channel storage
target. The port name is a 64-bit identifier in the format:
NN:NN:NN:NN:NN:NN:NN:NN, where N is a hexadecimal number
BootLun (optional)
The LUN of the volume used for SAN boot. Valid values include an integer
from 0-255 or 16 hex digits (HP-UX only).
Examples
->set fc-connection MyProfile 1 Fabric=SAN_5
Changes the fabric of an FC SAN fabric connection