HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide

Command line 40
Item Description
Example
->show mac-cache
Displays Ethernet MAC Cache failover settings
network
Manage Virtual Connect Ethernet networks.
Supported actions: add, help, remove, set, show
Item Description
add network
Create a new Ethernet Network. After the network has been created, uplink ports
can be added, if the network is not using a shared uplink port set.
Syntax
add network <NetworkName> [-quiet] [UplinkSet=<UplinkSetName>
VLanID=<VLanID>] [State=<Enabled|Disabled>]
[SmartLink=<Enabled|Disabled>]
[NativeVLAN=<Enabled|Disabled>] [Private=<Enabled|Disabled>]
[ConnectionMode=<Auto|Failover>]
[VLanTunnel=<Enabled|Disabled>] [PrefSpeedType=<Auto|Custom>]
[PrefSpeed=<speed>] [MaxSpeedType=<UnRestricted|Custom>]
[MaxSpeed=<speed>]
Parameter
NetworkName
(required)
The unique name of the new network to create (required)
Option
Quiet
Suppresses user confirmation prompts during network creation and modification.
This option is used mainly in automated scripting scenarios.
Properties
UplinkSet
(optional)
The name of an existing shared uplink port set to use with this new network. If this
property is specified, then a valid VLAN ID must also be provided. The limit is 32
networks per shared uplink set.
VLanID (required
if network is
associated with
shared uplink
set)
The VLAN ID associated with the network (used with shared uplink port set only). The
VLAN ID is a valid number between 1 and 4094.
State (optional)
Enables or disables the network. Valid values are "Enabled" and "Disabled". The
default value is "Enabled".
SmartLink
(optional)
Enables or disables the SmartLink capability for a port. Valid values are "Enabled"
and "Disabled". The default value is "Disabled".
NativeVLAN
(optional)
Enables or disables the network to act as a native VLAN. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property can be specified only
if the network is a shared network.
Private
(optional)
Enables or disables the network to act as a private network. Valid values are
"Enabled" and "Disabled". The default value is "Disabled".
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
network. Valid values include "Auto" and "Failover". The default value is "Auto".