HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide

Command line 41
Item Description
VLanTunnel
(optional)
Enables or disables VLAN tag tunneling. If enabled, VLAN tags are passed through
the domain without any modification. If disabled, all tagged frames are discarded.
If multiple networks are configured on any server port, this option cannot be
modified.
PrefSpeedType
(optional)
Default connection speed for any Ethernet connection attached to this network. Valid
values include "Auto" and "Custom". "Custom" allows the user to configure the
preferred speed. The default value is "Auto".
PrefSpeed
(required if
PrefSpeedType is
"Custom")
The connection speed for any Ethernet connection attached to this network. Valid
values range from 100Mb-10Gb in 100Mb increments.
MaxSpeedType
(Optional)
Maximum connection speed for any Ethernet connection attached to this network.
Valid values include "Unrestricted" and "Custom". "Custom" allows the user to
configure the preferred speed. The default value is "Unrestricted".
MaxSpeed
(required if
MaxpeedType is
"Custom")
The maximum connection speed for any Ethernet connection attached to this
network. Valid values range from 100Mb-10Gb in 100Mb increments.
Examples
->add network MyNewNetwork
Creates a new network, and then adds it to the domain
->add network MyNewNetwork2 UplinkSet=MyUplinkSet VLanID=145
Creates a new network and uses a shared uplink port set
->add network Network1 State=Disabled SmartLink=Enabled
Creates a new network with SmartLink Enabled and Status Disabled
->add network Network1 Private=Enabled
Configures a private network when adding a new network
->add network Network1 UplinkSet=Uplinkset1 VLANID=100
NativeVLAN=Enabled
Creates a new network with a shared uplinkset and tags it as Native VLAN
->add network Network1 ConnectionMode=Failover
Creates a new network and sets the connection mode as failover
->add network Network1 VLanTunnel=Enabled
Creates a new network and enables VLAN tunneling
->add network Network1 PrefSpeedType=Custom PrefSpeed=4000
MaxSpeedType=Custom MaxSpeed=6000
Creates a new network with a preferred connection speed of 4Gb and maximum
connection speed of 6Gb
Item Description
remove network
Remove a network from the domain. To remove a network, it must not be in use by
any server profiles.
Syntax
remove network <NetworkName | *>
Parameter
NetworkName
(required)
The name of an existing network in the domain
Examples