HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide

Command line 52
Item Description
->set serverid Type=User-Defined Start=VCX0000001
End=VCX0100010
Modifies virtual server ID settings to use a custom, User-Defined serial number
range
Item Description
show serverid
Display virtual server ID configuration properties.
Syntax
show serverid
Example
->show serverid
Displays virtual server ID configuration properties
server-port
Display the physical server ports.
Supported actions: help, show
Item Description
show server-port
Display physical port information.
Syntax
show server-port <PortID>
Parameter
PortID (Optional)
The reference of a port mapping ID. The PortID format is
EnclosureID:IOBay:Port. The Port ID can be referenced from the ID column
in the summary display. The detailed display shows any Flex NICs that might be
associated with a server port.
Examples
->show server-port
Displays a summary listing of all physical server ports
->show server-port *
Displays detailed information for all physical server ports
->show server-port enc0:3:d2
Displays detailed information for a specific server port
server-port-map
Add new server port network mapping
Supported actions: add, help, remove, set, show
Item Description
add server-port-map
Add a new server port network mapping, and allow server ports to be shared
among multiple VC Ethernet networks.
This command cannot be used if the domain setting VLanTagControl is currently
set to "Tunnel".