HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide

Command line 55
Item Description
->show server-port-map *
Displays detailed output of all the server port mappings
snmp
View and modify the SNMP configuration for VC-Enet and VC-FC modules, and add, modify, and remove
SNMP trap configurations related to trap destinations.
Supported actions: set, show
Item Description
set snmp
Modify the SNMP configuration for the VC domain.
Syntax
set snmp <Type> [ReadCommunity=<ReadCommunityString>]
[SystemContact=<SystemContact>] [Enabled=<true|false>]
[SmisEnabled=<true|false>]
Parameter
Type (required)
Indicates for which I/O module the SNMP configuration should be applied
(required). Valid values include "Enet" and "FC".
Properties
ReadCommunity
(optional)
Read-Only Community String for SNMP. The default value is "Public" if not
specified.
SystemContact
SNMP system contact information. If type is "FC", the maximum length is 12
characters.
Enabled (optional)
Enables or disables the SNMP agent. The default value is "true". Valid values
include "true" or "false".
SmisEnabled
(optional)
This property is valid only for FC modules. The default value is "false". Valid
values include "true" or "false".
Examples
->set snmp Enet ReadCommunity=datacentre1
SystemContact=[e-mail] Enabled=true
Enables the SNMP agent for VC-Enet modules and supplies a community string
->set snmp FC ReadCommunity=datacentre2
SystemContact=[e-mail] Enabled=true
Enables the SNMP agent for VC-FC modules
->set snmp FC Enabled=false
Disables the SNMP agent for VC-FC modules
Item Description
show snmp
Display the SNMP configuration settings for the VC domain.
Syntax
show snmp <Type>
Parameter
Type (optional)
Indicates the type of VC module to display SNMP configuration for. If the type is
not specified, all VC module SNMP configuration information is displayed. Valid
values include "Enet" and "FC".
Examples