HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide

Command line 56
Item Description
->show snmp Enet
Displays SNMP configuration for only VC-Enet modules
->show snmp FC
Displays SNMP configuration for only VC-FC modules
->show snmp
Displays SNMP configuration for all VC modules
snmp-trap
Displays SNMP trap information
Supported actions: add, remove, set, show
Item Description
snmp-trap
Add a new SNMP trap destination for VC-Enet and VC-FC interconnect modules.
Syntax
add snmp-trap <TrapID> [Community=<community name string>]
Parameter
TrapID (required)
(Required) The reference name of the new trap destination to be added. The
format of the trap ID is <ENET|FC>:<Address> where the address is the IP
address of the trap destination host.
Property
Community
(optional)
The SNMP community name string for the specified trap.Default is "public". For
VC-ENET modules, maximum string length is 39. For VC-FC modules, maximum
string length is 24.
Examples
->add snmp-trap ENET:192.112.34.89 community=datacenter1
Adds a new trap destination for VC-Enet modules
->add snmp-trap FC:192.112.34.89 community=public
Adds a new trap destination for VC-FC modules
Item Description
remove snmp-trap
Remove a previously configured SNMP trap destination.
Syntax
remove snmp-trap <TrapID | *>
Parameter
TrapID (required)
(Required) The reference name of the trap destination to be removed. The format
of the trap ID is <ENET|FC>:<Address> where the address is the IP address of
the trap destination host. "*" removes all the configured SNMP traps.
Example
->remove snmp-trap ENET:192.135.67.89
Removes an SNMP trap destination for VC-Enet modules
Item Description
set snmp-trap
Modify SNMP trap configuration properties.
Syntax
set snmp-trap <TrapID> Community=<community name string>