HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide

Command line 63
Item Description
UplinkSet
(optional)
The name of the shared uplink port set from which the port is to be removed
Examples
->remove uplinkport enc0:1:2 Network=MyNetwork
Removes a specific uplink port (Bay 1, Port 2) from a network
->remove uplinkport * Network=BlueNetwork
Removes all uplink ports from a network named "BlueNetwork"
->remove uplinkport enc0:2:3 UplinkSet=SharedUplinkSet1
Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set
Item Description
set uplinkport
Modify an uplink port that exists as a member of a network or shared uplink port set.
Syntax
set uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSetName>][Speed=<Auto|10Mb|100Mb|1Gb|Disable
d>] [Role=<Primary|Secondary>]
Parameter
PortID (required)
The name of the port to modify (required). The specified port must already be added
to a network or uplink port set. The port name is in the format:
<EnclosureID>:<BayNumber>:<PortNumber>
Properties
Network
(optional)
The name of the network to which the port belongs
UplinkSet
(optional)
The name of the shared uplink port set to which the port belongs
Speed (optional)
Specifies the port speed for the port. Acceptable values include "Auto", "10Mb",
"100Mb", "1Gb", and "Disabled".
Role (optional)
The role played by the port if the connection mode of the network or shared uplink
set is selected as "Failover". The default value is "Primary".
Examples
->set uplinkport enc0:1:2 Network=MyNetwork Speed=1Gb
Changes the port speed of a network port
->set uplinkport enc0:2:1 Network=MyNetwork Speed=Disabled
Disables a specific port that belongs to a network
->set uplinkport enc0:2:4 UplinkSet=MyUplinkSet
Speed=Disabled
Disables a specific port that belongs to a shared uplink set
->set uplinkport enc0:2:4 Network=MyNetwork Role=Primary
Modifies a network uplink port with the connection mode set as "Failover" to take
the primary port role
Item Description
show uplinkport
Display all Ethernet module uplink ports known to the domain. If the port is a
member of a network or a shared uplink port set, then it is displayed also.
Syntax
show uplinkport <PortID | *>
Parameter