HP Virtual Connect Manager Command Line Interface Version 2.30 User Guide

Command line 37
Item Description
set ldap-group
Modify the properties of an existing directory group.
Syntax
set ldap-group <GroupName> [Description=<description>]
[Privileges=<privileges>]
Parameter
GroupName (required)
The name of an existing group to modify
Properties
Description
(optional)
A user-friendly description for the group
Privileges (optional)
A set of one or more privileges for the group. Valid values include any
combination of "domain", "server", "network", and "storage".
Example
->set ldap-group MyGroup Description="Test Group"
Privileges=domain,server,network
Modifies a directory group description and privileges
Item Description
show ldap-group
Display the existing directory groups.
Syntax
show ldap-group [<GroupName>|*]
Examples
->show ldap-group
Displays LDAP group information
->show ldap-group *
Displays detailed information for all LDAP groups
log-target
Manage remote log destination settings.
Supported actions: add, help, remove, set, show, test
Item Description
add log-target
Add a new remote log destination.
Syntax
add log-target <Destination=IpAddress|DNS>
[Severity=<Critical|Error|Warning|Info>]
[Transport=<TCP|UDP>] [Port=<1-65535>]
[Security=<None|STunnel>] [Format=<RFC3164|ISO8601>]
[State=<Enabled|Disabled>]
Properties
Destination
(required)
The IpAddress or the DNS of the configured remote log destination
Severity (optional)
Severity of the log messages that should be sent to the specified destination.
Valid values include "Critical", "Error", "Warning", and "Info". The default
value is "Info".
Transport (optional)
The transport protocol to be used for sending the log messages to the
destination. Valid values include "TCP" and "UDP". The default value is "UDP".