HP Virtual Connect Manager Command Line Interface Version 2.30 User Guide

Command line 58
Item Description
->add snmp-trap MyTrap Address=192.112.42.5 Severity=All
FcCategories=All DomainCategories=All
Adds a trap with all severity and category properties set. Severities are allowed
even though FC Categories are set; the severities will be applied to the Domain
Categories.
Item Description
remove snmp-trap
Removes a previously configured SNMP trap destination
Syntax
remove snmp-trap <Name | *>
Parameter
Name (required)
The name of the trap destination to be removed. If "*" is specified, then all traps
are removed.
Examples
->remove snmp-trap MyTrap1
Removes an SNMP trap destination
->remove snmp-trap *
Removes all configured SNMP trap destinations
Item Description
set snmp-trap
Modifies an existing SNMP trap destination
Syntax
set snmp-trap <TrapName> [Name=<trap destination
name>][Address=<trap destination
address>][Community=<community name
string>][Format=<SNMPv1 | SNMPv2>][Severity=<trap severity
| All|None>][DomainCategory=<domain trap category |
All|None>][EnetCategory=<enet trap category |
All|None>][FcCategory=<fc trap category | All|None>]
Parameter
TrapName (required)
The name of the trap to be modified
Properties
Name
New name of the trap
Address (required)
IPv4 address or DNS name for the trap destination
Community
(optional)
The SNMP community name string for the specified trap. For VC-Enet modules,
the maximum string length is 39. For VC-FC modules, the maximum string length
is 12. If not specified, the default community name is "public".
Format
Format of the new trap. Valid values are "SNMP1v" and "SNMPv2". The default
is "SNMPv1". SNMPv2 traps are not supported on VC-FC modules.
Severity
Trap severities to send to the destination. Valid values are "Normal",
"Unknown", "Info", "Warning", "Minor", "Major", "Critical", "All", and
"None".
Multiple severities can be provided, separated by commas. The default severity is
"None".
DomainCategories
The Virtual Connect Domain trap categories to send to the destination. Valid
values are "Legacy", "DomainStatus", "NetworkStatus", "FabricStatus",
"ProfileStatus", "ServerStatus", "EnetStatus", FcStatus", "All", and "None".
Multiple categories can be specified, separated by commas.