HP Virtual Connect Manager Command Line Interface Version 2.30 User Guide

Command line 59
Item Description
EnetCategories
The Virtual Connect Ethernet trap categories to send to the destination. Valid
values are "PortStatus", "PortThreshold", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
FcCategories
The Virtual Connect Fibre Channel trap categories to send to the destination.
Valid values are "PortStatus", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
Examples
->set snmp-trap MyTrap1 Community=public
Sets the trap community
->set snmp-trap MyTrap1 Severity=All FcCategories=None
EnetCategories=None
Sets all trap severities, and also sets the Fibre Channel and Ethernet categories to
none
Item Description
->show snmp-trap
Displays the SNMP traps that have been configured
Syntax
show snmp-trap [Name| *]
Parameter
Name
The name of the trap configuration to be displayed. If no trap name is specified,
or "*" is entered, then all configured traps are displayed.
Examples
->show snmp-trap MyTrap1
Displays the SNMP trap configuration for a single trap
->show snmp-trap *
Displays all configured SNMP traps
Item Description
->test snmp-trap
Generates an SNMP test trap and sends it to all configured destinations.
Traps participating in the test must be configured, at a minimum, with the
following attributes:
DomainCategories: DomainStatus
Severity: Info
Syntax
test snmp-trap
Example
->test snmp trap
Generates an SNMP test trap and sends it to the configured destinations
ssh
Display the SSH key configuration.
Supported actions: help, load, remove, show