HP Virtual Connect Version 3.61 Release Notes

Appendix: Feature details 22
Item Description
pauseFlood
(required)
Enables/disables pause flood detection and protection. Valid values are "Enabled"
and "Disabled".
Example
->set port-protect networkLoop=Enabled PauseFlood=Enabled
Sets the global option to enable the loop protection and pause flood protection
Item Description
show port-protect
Display the loop protection and pause flood protection.
Syntax
show port-protect
Example
->show port-protect
Displays the loop protection and pause flood protection
CLI show config command
Display all CLI commands for all objects defined in the domain. The show config command is useful for
generating a CLI script that can be used for creating a domain configuration. The generated script is only
valid for the firmware version currently running. A script generated on one version of firmware is unlikely to
be properly executed by a different version of firmware.
Externally-defined MAC addresses, WWNs and serial numbers are displayed with a warning in the output
and cannot be used on VCMCLI commands when recreating the domain.
Supported actions: help, show
Item Description
show config
Generate a configuration script from the running domain.
Syntax
show config -includePoolInfo
Option
includePoolInfo
Include VC-defined or user-defined pool assigned SerialNumber, MAC, and
WWN addresses for the domain.
Examples
->show config
Displays the configuration script for the running domain
->show config -includePoolInfo
Displays the configuration script for the running domain, including the pool ID or
user-defined range