HP Virtual Connect Version 3.61 Release Notes

Issues and workarounds 7
Issue
A non-user friendly SOAP error message appears in the GUI after confirming a DELETE DOMAIN operation.
This might occur when a user that is logged in with multiple sessions tries to log out of one session (either a
tab or window) or if another user deleted the VC domain.
Workaround
Acknowledge the message and continue.
Issue
After fail over from the primary module to a backup module, the following SNMP traps are not received.
Traps Value/Severity
vcDomainManagedStatus
Minor
vcModuleManagedStatus
Critical
vcEnclosureManagedStatusChange
Minor
vcProfileManagedStatusChange
Unknown
vcEnetNetworkManagedStatus
Unknown
Issue
Virtual Connect Manager might reset when it contains more assigned and unassigned profiles than can be
in use by physical servers in the domain.
Issue
The VCM CLI show uplinkport command does not display the serial numbers for pluggable modules.
Issue
For double-dense server blades, the side B server mezz port mapping is incorrect.
Issue
The timestamp for SNMP traps from VC-FC interconnect modules is not in sync with the timestamp kept by
Virtual Connect Manager.
Issue
The GUI allows importing a new domain from and existing configuration file without warning you to power
off all server blades.
Workaround
Power off all server blades before using a configuration file to import a new domain.
Issue
The HP VC 8 Gb 24-Port FC Module does not respond to the HP Insight Control cpqHoGUID MIB request and
is reported as an error.
Workaround
Remove the FC module from the query.
Issue
HP Systems Insight Manager might incorrectly identify the HP VC 8 Gb 24-Port FC module as a SAN switch
because of the incorrect value returned in the SysObjectOid.
Issue