FCoE Cookbook for HP Virtual Connect Version 4.20 Firmware Enhancements May 2014

127
o interface fc 2/1
o switchport description Connected to the 3PAR array
o no shutdown
# Assign it to VSAN200 as a trunk port
o switchport trunk allowed vsan 200
 Assign the Virtual Fibre Channel interfaces (vfc) and the Fiber Channel interface to the FCoE VSANs:
o vsan database
o vsan 200
o vsan 200 interface fc2/1
o vsan 200 interface vfc 1000
o vsan 300
o vsan 300 interface vfc 2007
 Configure the interface connected to the datacenter LAN:
o interface eth 1/17
o switchport mode trunk
o switchport trunk allowed vlan 1,10,20
 Configuration of the zone:
a. Create the first VSAN zone for the 3PAR Storage target:
o zone name fcoe-zone-3PAR vsan 200
o member pwwn 21:53:00:02:ac:00:15:9d {This is the WWN of the first 3PAR controller port}
o member pwwn 50:06:0b:00:00:c3:1e:08 {This is the WWN of the first Blade FlexFabric Adapter port 1}
b. Create zoneset:
o zoneset name zoneset-3PAR vsan 200
o member fcoe-zone-3PAR
c. Activate zoneset:
o zoneset activate name zoneset-3PAR vsan 200
d. Create the second VSAN zone for the EVA Storage target:
o zone name fcoe-zone-EVA vsan 300
o member pwwn 50:01:43:80:02:5D:19:72 {This is the WWN of the first FCoE EVA port}
o member pwwn 50:06:0b:00:00:c3:1e:0c {This is the WWN of the second Blade FlexFabric Adapter port 1}
e. Create zoneset:
o zoneset name zoneset-EVA vsan 300
o member fcoe-zone-EVA
f. Activate zoneset:
o zoneset activate name zoneset-EVA vsan 300
HP 5900 switch-B configuration
 Upgrade the HP 5900 switch with minimum supported firmware version (to get the running version, enter: display
version).
Note: Refer to SPOCK connectivity stream documents for 5900 Series for additional information at
http://h20272.www2.hp.com/Pages/spock2Html.aspx?htmlFile=hw_switches.html