FCoE Cookbook for HP Virtual Connect Version 4.20 Firmware Enhancements May 2014

192
HP Networking Troubleshooting commands
For more detailed information about HP 5900 series, see
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?lang=en&cc=us&sp4ts.oid=5221896
Useful fc/fcoe commands
 display fcoe-mode
 display fcoe
o This command shows if FCoE is enabled.
o It displays the FCoE MAC and the FC-MAP of the HP Networking device. This command is useful because every
FCoE frame sent by servers always use this FCoE MAC address as their Destination MAC Address.
o The FKA period shows the FIP Keep Alive advertisements that are sent by a vfc interface.
 display fc login
o This command displays all FC logins (server nodes and storage devices) which have logged into the Fabric
using FC and FCoE. Each FCoE Adapter port logs into the Fabric using a dedicated virtual FC interface. The vfc
are listed along with the WWPN addresses (VC assigned or factory default), the VSAN numbers and the FCIDs
assigned by the Fabric to every single server.
 display fc name-service database
o This command displays the name service database information.