FCoE Cookbook for HP Virtual Connect Version 4.20 Firmware Enhancements May 2014

31
Nexus configuration
Details about the configuration:
 FCF mode is used.
 Interfaces eth1/5 are connected to the VC modules.
 Interfaces eth1/17 are connected to the datacenter LAN.
 Interfaces fc2/1 and fc2/2 are directly connected to Cisco MDS 9148 switches through a SAN Port Channel.
 SAN port channels spo100 are configured to pass FCoE VSANs 200 and 201.
 VLAN IDs 200 and 201 are used for the FCoE networks.
 VLAN IDs 1, 10 and 20 are the standard Ethernet networks (non-FCoE networks).
 The virtual Fibre Channel interfaces vfc 2005 bind to the MAC addresses of the first Blade server.
 The virtual Fibre Channel interfaces vfc 2006 bind to the MAC addresses of the second Blade server.
Figure 15: Physical diagram
HP BladeSystem c7000
Blade Servers
FCoE NIC
CNA
Port 1
CNA
Port 2
WWN:
50:06:0b:00:00:c3:1a:22
WWN:
50:06:0b:00:00:c3:1a:20
FCoE NIC
CNA
Port 1
CNA
Port 2
FCoE NIC
WWN:
50:06:0b:00:00:c3:1a:26
WWN:
50:06:0b:00:00:c3:1a:24
FCoE NIC
FCoE VLAN 200 FCoE VLAN 201 FCoE VLAN 200 FCoE VLAN 201
LAN
fc2/1-2
X3
X3
VLAN 1,10,20
eth1/17
VSAN 201VSAN 200
Switch A
Nexus-5010
FCF Mode
VC FlexFabric
Bay 1
VC FlexFabric
Bay 2
3PAR
Storage Array
Switch B
Nexus-5010
FCF Mode
FCoE / DCB
Native
Ethernet
+
Native
Fibre Channel
WWN:
20:53:00:02:ac:00:15:9d
WWN:
21:53:00:02:ac:00:15:9d
SAN-A SAN-B
Cisco MDS-B
9148
fc2/1-2
spo100spo100
fc1/9
fc1/10
fc1/9
fc1/10
Cisco MDS-A
9148
eth1/5
vfc 2005
vfc 2006
eth1/5
vfc 2005
vfc 2006
FCoE VLAN 201
VLAN 1,10,20
VSAN 201
FCoE VLAN 200
VLAN 1,10,20
VSAN 200
VLAN 1,10,20
eth1/17
Converged Ethernet/FCoE
FC
LAN