FCoE Cookbook for HP Virtual Connect Version 4.20 Firmware Enhancements May 2014

47
 switchport trunk allowed vsan add 301
 interface fc1/9-10
 switchport description Connected to Nexus-B-fc2/1-2
 channel-group 100
 no shutdown
 Assign the Virtual Fibre Channel interfaces (vfc) and the SAN Port Channel to the FCoE VSANs:
o vsan database
o vsan 201
o vsan 201 interface san-port-channel 100
o vsan 201 interface vfc 2005
o vsan 301
o vsan 301 interface vfc 2006
 Configure the interface connected to the datacenter LAN:
o interface eth 1/17
o switchport mode trunk
o switchport trunk allowed vlan 1,10,20
 Configuration of the zone:
a. Create the first VSAN zone for the 3PAR Storage target:
o zone name fcoe-zone-3PAR vsan 201
o member pwwn 20:53:00:02:ac:00:15:9d {This is the WWN of the second 3PAR controller port}
o member pwwn 50:06:0b:00:00:c3:1a:22 {This is the WWN of the first Blade FlexFabric Adapter port 2}
b. Create zoneset:
o zoneset name zoneset-3PAR vsan 201
o member fcoe-zone-3PAR
c. Activate zoneset:
o zoneset activate name zoneset-3PAR vsan 201
d. Create the second VSAN zone for the EVA Storage target:
o zone name fcoe-zone-EVA vsan 301
o member pwwn 50:01:43:80:02:5D:19:79 {This is the WWN of the second EVA controller port}
o member pwwn 50:06:0b:00:00:c3:1a:26 {This is the WWN of the second Blade FlexFabric Adapter port 2}
e. Create zoneset:
o zoneset name zoneset-EVA vsan 301
o member fcoe-zone-EVA
f. Activate zoneset:
o zoneset activate name zoneset-EVA vsan 301