HP Virtual Connect for c-Class BladeSystem Version 3.70/3.75 User Guide

Virtual Connect networks 90
Ethernet Settings (Advanced Settings) screen
Use this screen to perform the following tasks:
• Set Server VLAN Tagging Support (on page 91).
• Set VLAN Capacity (on page 92).
• Use the Multiple Networks Link Speed Settings (on page 92) to set a custom value for preferred link
connection speed or maximum link connection speed.
• Enable or disable MAC Cache Failover (on page 93).
• Modify the refresh interval for MAC Cache Failover (on page 93).
• Enable or disable IGMP Snooping (on page 93).
• Modify the idle timeout interval for IGMP Snooping (on page 93).
• Allow or prevent flooding of unregistered IGMP multicast traffic ("IGMP Snooping" on page 93).
• Enable or disable Network Loop Protection (on page 94) for all VC-Enet modules in the domain.
• Reset Network Loop Protection for all server ports in a loop-detected error state.
• Enable and configure Throughput Statistics ("Configuring Throughput Statistics" on page 95) for all
ports of each VC-Enet module, including Flex-10 subports.