HP BladeSystem c-Class Virtual Connect Support Utility Version 1.5.
© Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software.
Contents Important notes and recommendations ............................................................................................ 4 New features ............................................................................................................................... 5 General requirements ....................................................................................................................
Important notes and recommendations • Because of a change in the installation method for HP 4Gb Virtual Connect Fibre Channel firmware version 1.11, HP recommends using this version of the Virtual Connect Support Utility to install the firmware. If the HP 4Gb Virtual Connect Fibre Channel firmware version 1.11 firmware is installed with Virtual Connect Manager or with HP BladeSystem c-Class Virtual Connect Support Utility version 1.2.0 or earlier, the HP 4Gb VC-FC Module might present a degraded status.
New features The HP BladeSystem c-Class Virtual Connect Support Utility Version 1.5.0 contains the following enhancements: • Upgrading to a new Virtual Connect 8Gb 20-Port Fibre Channel Module • Onboard Administrator version added to healthcheck action • Firmware Signature Validation (for Virtual Connect firmware version 2.
General requirements • Microsoft® Windows® XP (Service Pack 1 or 2), Windows Server® 2003, or Windows Vista® operating systems must be installed on the client. • When upgrading from Virtual Connect 4Gb FC module version 1.31 or earlier, users must have Administrative or Power User privileges on the client system to install and run the utility. • A valid HP Virtual Connect firmware package must be available to install. Download the firmware from the HP website (http://www.hp.com).
