HP Virtual Connect 1Gb Ethernet Cookbook

Scenario 5 – VLAN Tagging (802.1Q) with a Shared Uplink Set (SUS) with Link Aggregation using LACP (802.3ad) –
VMware ESX 63
Figure 59 - VLAN-Trunk Link aggregation confirmed – Bay 2.
Note: All connections within an LACP group will have the same LAG ID. To view this, go to the
Interconnect bay and view Uplink Port Information. If you are having troubles establishing an
active/active connection, confirm the LAG ID.
Defining a Server Profile with NICs Connections to multiple VLANs, via GUI
Each server NIC will connect to a network.
On the Virtual Connect Manager screen, click Define, Server Profile to create a Server Profile
 Create a server profile called “ESX-1”
 In the Network Port 1 drop down box, select “Multiple Networks”
 Select VLANs, 101 through 105 and 2101,2110,2120
 Check Untagged for VLAN-101
 In the Network Port 2 drop down box, select “Multiple Networks”
 Select VLANs, 101 through 105 and 2101,2110,2120
 Check Untagged for VLAN-101
 In the Assign the Profile to a Server Bays, select Bay 1 and apply