HP Virtual Connect for c-Class BladeSystem User Guide

HP Virtual Connect Manager 91
• Select Fibre Channel Settings from the Configure pull-down menu.
Virtual Connect Manager Server Profile Wizard
This wizard enables you to setup and configure network/SAN connections for the server blades within the
enclosure.
Use the wizard to define a server profile template that identifies the server connectivity to use on server
blades within the enclosure. Then use the template to create and apply server profiles to up to 16 server
blades automatically. Once created, the individual server profiles can be edited independently.
Before beginning the server profile wizard, do the following:
• Complete the Network Setup Wizard.
• Complete the Fibre Channel Setup Wizard (if applicable).
• Be sure that any server blades to be configured using this wizard are powered off.
This wizard walks you through the following tasks:
• Designate serial numbers (logical) (optional)
• Define a server profile template
• Assign server profiles
• Name server profiles