HP Virtual Connect for c-Class BladeSystem Version 3.00 Setup and Installation Guide for HP Integrity BL8x0c i2 Series Server Blades

HP Virtual Connect Manager 90
For more information on defining a new shared uplink set and VLAN tagging, see the HP Virtual Connect
for c-Class BladeSystem User Guide.
Finish network wizard
When the Network Setup Wizard completes, external Fibre Channel connectivity can be configured (if
applicable) or server profiles can be defined and associated with server blades.
To establish external Fibre Channel connectivity:
1. Be sure the Start the Fibre Channel Wizard checkbox is selected.
2. Click Finish. The Fibre Channel Wizard Welcome screen is displayed.
To begin deploying server blades:
1. Be sure the Start Fibre Channel Wizard checkbox is not selected.
2. Click Finish.
3. Select Define Server Profile from the homepage.
Additional network connections can be defined at any time by using one of the following methods:
• Select the Define a Network link on the homepage.
• Select the Define a Shared Uplink Set link on the homepage.
Select Ethernet Network from the Define pull-down menu.