HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.51/3.60 User Guide

Configuring the Virtual Connect domain using the CLI 126
login as: <RADIUS user>
password: <password>
• TACACS+ Authentication
>ssh 192.168.0.120
login as: <TACACS+ user>
password: <password>
• Mechanism-based Authentication
>ssh 192.168.0.120
login as: <auth-mechanism>:<username>
password: <password>
Valid values for auth-mechanism are local, ldap, radius, and tacacs.
For example:
>ssh 192.168.0.120
login as: tacacs:<TACACS+ user>
password: <password>
• Role-based Authentication
>ssh 192.168.0.120
login as: <role>:<username>
password: <password>
Valid values for role are domain, network, server, and storage.
For example:
>ssh 192.168.0.120
login as: network:<username>
password: <password>
In role-based authentication, the role authentication order configured for the specified "role" will be
used.
Domain setup
After logging in to the CLI (on page 125), perform the following tasks to set up the domain:
1. Import the enclosure ("Importing an enclosure" on page 126).
2. Name the domain ("Setting the domain name" on page 127).
3. Set up local user accounts and privileges ("Configuring local users" on page 127).
4. Set up authentication support for users:
o LDAP authentication ("Configuring LDAP authentication support for users" on page 128)
o RADIUS authentication ("Configuring RADIUS authentication support for users" on page 128)
o TACACS+ authentication ("Configuring TACACS+ authentication support for users" on page 129)
5. Set up role-based authentication ("Configuring role-based authentication settings" on page 129).
Importing an enclosure
To import an enclosure, use the import enclosure command.
To enter OA credentials during import:
>import enclosure username=Administrator password=myPassword
To be prompted for a masked password: