HP Virtual Connect Version 2.10 Release Notes

Hardware and firmware requirements 4
Hardware and firmware requirements
HP Virtual Connect firmware
The latest HP Virtual Connect firmware package (version 2.10) contains the following firmware versions:
• HP VC-Enet version 2.10
• HP VC 4Gb FC version 1.32
• HP VC 8Gb FC version 1.00
The HP BladeSystem c-Class Virtual Connect Firmware v2.10 is available with the following packages:
• Ethernet plus 4Gb FC Edition—contains the firmware for the VC-Enet modules and the VC 4Gb FC
modules.
• Ethernet plus 8Gb FC Edition—contains the firmware for the VC-Enet modules and the VC 8Gb FC
module.
• Ethernet plus 4Gb and 8Gb FC Edition—this package is used by the HP BladeSystem c-Class Virtual
Connect Support Utility. It contains the firmware for the HP VC-Enet modules, the HP VC 4Gb FC
modules, and the HP VC 8Gb FC module.
IMPORTANT: When updating firmware, update each domain with the entire firmware
package, which includes the individual VC-Enet and VC-FC firmware. Updating only the VC-
Enet firmware or only the VC-FC firmware is not supported.
Supported hardware
The HP Virtual Connect firmware v2.10 supports the following hardware:
• Virtual Connect modules
o HP Virtual Connect Flex-10 10Gb Ethernet Module
o HP 1/10Gb Virtual Connect Ethernet Module
o HP 1/10Gb-F Virtual Connect Ethernet Module
o HP 4Gb Virtual Connect Fibre Channel Module
o HP Virtual Connect 4Gb Fibre Channel Module
o HP Virtual Connect 8Gb 24-Port Fibre Channel Module
• Server blades and workstation blades
o HP ProLiant BL2x220c G5 Server Blade
o HP ProLiant BL260c G5 Server Blade
o HP ProLiant BL280c G6 Server Blade
o HP ProLiant BL460c Server Blade
o HP ProLiant BL460c G5 Server Blade