Manualshelf

Virtual Connect and HP A-Series switches (A5820) IRF Integration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem
11121314151617181920
16
Flex-10: LLDP
LLDP transmits and receives are enabled by default on all Virtual Connect modules interfaces,
including Flex-10 and Flexfabric. No configuration is required.
Trunk-A and Trunk-B are defined in the following LACP sections. All links will show as active only after
finishing the LACP configuration on the switch and Virtual Connect.
VC1 connects with IRF logical switch ten1/0/1 and ten2/0/25.
VC2 connects with IRF logical switch ten1/0/2 and ten2/0/26.