Manualshelf

Virtual Connect and HP A-Series switches (A5820) IRF Integration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem
36373839404142434445
44
Appendix 2: Design 3 running status
Using design option three, if one port channel interface is configured on an A5820 switch and one
SUS is configured on a Virtual Connect to bundle four links on both sides, the A5820 switch does not
select two out of four links as active LACP links.
VC1 status is OK.
VC2 status is not OK. The “LAG ID” column is empty, which means no LACP bundle is established.
Both links are put into standby as individual links for this SUS.