FCoE Cookbook for HP Virtual Connect Version 4.20 Firmware Enhancements May 2014

125
Note: The MAC Address of the FCoE adapter is found under the Virtual Connect Server Profile:
 Create a virtual Fibre Channel interface for the second Blade server
o interface vfc 2
o description vfc for Server-2
# Bind the Bridge Aggregation to the MAC address of the first Blade server FCoE adapter 1
o bind interface Bridge-Aggregation20 mac 0017-a477-bc46
# Assign it to the FCoE EVA VSAN
o port trunk vsan 300
Nexus switch-A configuration
 Upgrade the Nexus switch with minimum NX-OS supported version.
Note: Refer to SPOCK C-Series FCoE Switch Connectivity stream for additional information at
http://h20272.www2.hp.com/Pages/spock2Html.aspx?htmlFile=hw_switches.html
 Enable FCoE on the switch (disabled by default):
o configure terminal
o feature fcoe
Note: The Nexus can require a reload.
 Enable NPIV on the switch (disabled by default):
o feature npiv
 Configuring Quality of Service to provide lossless service for FCoE traffic and best-effort service for Ethernet traffic:
o Refer to the Quality of Service configuration section.