Manualshelf

HP Virtual Connect Fibre Channel Networking Scenarios Cookbook

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
131132133134135136137138139140
134
Defining a Boot from SAN Server Profile using the GUI
1. From the FCoE HBA Connections section of the Virtual Connect Server Profile screen, select Fibre Channel Boot
Parameters to configure the Boot from FCoE SAN parameters.
2. From the FCoE HBA Connections pop up, click the drop-down arrow in the SAN Boot box for Port 1 and select
the boot order Primary.
3. Enter a valid Boot Target name and LUN number for the Primary Port.
4. Optionally, select the second port, click the drop-down arrow in the SAN Boot box, and then select the boot
order Secondary.