Manualshelf

HP Virtual Connect Fibre Channel Networking Scenarios Cookbook

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
151152153154155156157158159160
157
- With FlexFabric module by going to the Server Ports tab:
Server Port connection issues
There are several issues that can lead to a server ‘NOT-LOGGED-IN’ status:
- The VC Fabric uplink ports are also in a NOT-LOGGED-IN state (see the previous section).
- Server is turned off or is rebooting.
- HBA/CNA firmware is out of date.
Connectivity verification from the upstream SAN switch
You can also verify connectivity from the upstream SAN switch.
1. Log in to the Brocade SAN switch GUI.
2. Click Name Server on the left side of the screen. The Name Server list appears.
3. From the Name Server screen, locate the PWWN the server uses (such as, 50:06:0B:00:00:C2:62:2C) and then
identify the Brocade Port used by the VC-FC uplink (port 11).