Manualshelf

HP Virtual Connect Fibre Channel Networking Scenarios Cookbook

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
161162163164165166167168169170
167
Boot from SAN misconfigured
Figure 74: A “Bios is not installed” message can be shown as well when Boot from SAN is activated but with an
incorrectly configured Boot target WWPN
Troubleshooting
Main points to check when facing a Boot from SAN error:
Make sure the storage presentation and zoning configuration are correct.
Under the VC Profile, check the Boot from SAN configuration; make sure the WWPN of the Storage target and LUN
number are correct.
Make sure the VC Fabric uplink ports are logged-in the Fabric (see Appendix F).
Make sure the FC/FCoE server ports are logged-in the Fabric (see Appendix F).