Manualshelf

HP Virtual Connect Fibre Channel Networking Scenarios Cookbook

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
41424344454647484950
48
Defining a new VC SAN Fabric using the CLI
Configure the VC-FC modules from the CLI:
1. Log in to the Virtual Connect Manager CLI:
2. Enter the following commands to create the fabrics and assign the uplink ports:
add fabric Fabric-1 Bay=5 Ports=1,2,3,4
add fabric Fabric-2 Bay=6 Ports=1,2,3,4
3. When complete, run the show fabric command.