HP Virtual Connect Fibre Channel Networking Scenarios Cookbook

62
2. In the Define SAN Fabric screen, provide the VC Fabric Name, in this case Fabric-A-1
3. Add the uplink ports that will be connected to this fabric, and then click Apply. The following example uses Port
1, Port 2 and Port 3 from the first VC-FC module (Bay 5).
4. On the SAN Fabrics screen, click Add to create the second fabric.
5. Create a new VC Fabric named Fabric-A-2. Under Enclosure Uplink Ports, add Bay 5, Port 4, and then click
Apply.