Manualshelf

HP Virtual Connect Fibre Channel Networking Scenarios Cookbook

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
61626364656667686970
64
You have created four VC Fabric-Attach fabrics have been created, each with uplink ports allocated from one VC
module in Bay 3. Two of the fabrics are configured with Dynamic Login Balancing, and one is configured with
Static Login Distribution.
Defining a new VC SAN Fabric using the CLI
Configure the VC-FC modules from the CLI:
1. Log in to the Virtual Connect Manager CLI:
2. Enter the following commands to create the fabrics and assign the uplink ports:
add fabric Fabric-A-1 Bay=5 Ports=1,2,3
add fabric Fabric-A-2 Bay=5 Ports=4
add fabric Fabric-B-1 Bay=6 Ports=1,2,3
add fabric Fabric-B-2 Bay=6 Ports=4