VLS9200 user guide (BW402-10009, August 2012)

StatusDescriptionItem
Off = Identification is deactivated.
Green = System health is normal.Health LED2
Amber = System health is degraded. To identify the
component in a degraded state, see HP Systems
Insight Display LEDs and Internal Health LED
Combinations.
Red = System health is critical. To identify the
component in a critical state, see HP Systems Insight
Display LEDs and Internal Health LED Combinations.
Off = System health is normal (when in standby
mode).
Green = System is on.Power On/Standby button and system power LED3
Amber = System is in standby, but power is still
applied.
Off = Power cord is not attached, power supply
failure has occurred, no power supplies are installed,
facility power is not available, or the power button
cable is disconnected.
Rear Panel Components
DescriptionItem
Slot 1 PCIe2 x8 (8, 4, 2, 1)
1
1
Slot 2 PCIe2 x16 (16, 8, 4, 2, 1)
1
2
Power supply 13
Power supply 24
iLO 3 connector5
Serial connector6
Video connector7
NIC 4 connector8
NIC 3 connector9
NIC 2 connector10
NIC 1 connector11
USB connectors (2)12
VLS9200 Node Components, LEDs, and Buttons 173