VLS9200 user guide (BW402-10009, August 2012)

StatusSystem power
LED
Internal health LED
color
HP Systems
Insight Display
LED and color
• Processor X is unsupported.
• ROM detects a failed processor during POST.
Processor in socket X is in a pre-failure condition.GreenAmber
One or more DIMMs have failed.GreenRedDIMM (amber)
DIMM in slot X is in a pre-failure condition.GreenAmber
The Health Driver has detected a cautionary temperature
level.
GreenAmberOvertemperature
(amber)
The server has detected a hardware critical temperature
level.
GreenRed
The PCI riser board assembly is not seated properly.GreenRedInterlock (amber)
One fan is failed or removed.GreenAmberFan (amber)
Two or more fans have failed or are removed.GreenRed
AmberRedPower supply
(amber)
• Only one power supply is installed and that power supply
is in standby.
• Power supply fault
• System board fault
GreenAmber
• Redundant power supply is installed and only one power
supply is functional.
• AC power cord is not plugged into redundant power
supply.
• Redundant power supply fault
• Power supply mismatch at POST or power supply
mismatch through hotplug addition.
StandbyAmber—Power cap (off)
Waiting for powerFlashing green—Power cap
(green)
Power cap has been exceeded.Amber—Power cap
(flashing amber)
Power is available.Green—Power cap
(green)
IMPORTANT: If more than one DIMM slot LED is illuminated, further troubleshooting is required.
Test each bank of DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing each
DIMM in a bank with a known working DIMM.
178 Component Identification