VLS9200 user guide (BW402-10009, August 2012)

DescriptionItem
Ethernet port1
Serial port2
Fibre Channel ports3
XPAK transponder ports (not in use)4
Front Panel LEDs and Buttons
This section provides images and descriptions of the front panel LEDs and buttons of the Fibre
Channel Switch 8/20q.
StatusDescriptionItem
Green = The switch is receiving power.Input Power LED1
Off = One of these conditions exist:
• The switch is NOT receiving power.
• The switch is in maintenance mode.
Green = The switch is in maintenance mode.Heartbeat LED2
Blinking green (once per second) = the switch is operational.
Other blink patterns indicate critical errors:
• 2 blinks — internal firmware failure
• 3 blinks — Fatal power-on self test error
• 4 blinks — configuration file system error
• 5 blnks — over-temperature
A critical error also illuminates the System Fault LED.
Amber = a fault exists in the switch firmware or hardware. See the Heartbeat LED
blink pattern for details.
System Fault LED3
Fibre Channel Switch 8/20q Components, LEDs, and Buttons 183