VLS9200 user guide (BW402-10009, August 2012)

SpecificationItem
Temperature
• Operating: 41° to 104° F (5° to 40° C)
• Non-operating: 4° to 158° F (20° to 70° C)
Humidity
• Operating: 10% to 90% non-condensing
• Non-operating: 10% to 95% , non condensing
Altitude
• Operating: 0 to 10,000 ft.
• Non-operating: 0 to 50,000 ft.
Shock
• Operating: 4 G, 11 ms, 20 repetitions
• Non-operating: 30 G, 13 ms, trapezoidal
Vibration
• Operating: 5-500 Hz, random, 0.2 G
• Non-operating: 2-200 Hz, random, 0.5 G
Power consumption
100 to 240 VAC (operational)Supported power range
50 to 60 HzFrequency
80 watts nominal; 90 watts typical maximumHeat output
Ethernet Switch 2510–24 Specifications
SpecificationItem
9.3 x 17.42 x 1.73 in. (23.62 x 44.25 x 4.39 cm) 1U heightDimensions
4.9 lb (2.2 kg) fully loadedWeight
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX); 1 RJ—45 serial console port; 2 dual-personality ports,
Ports
each of which can be used as either an RJ-45 10/100/1000 port or
an open mini-GBIC slot (for use with mini-GBIC transceivers)
MIPS, 264 MHzProcessor
8 MBFlash capacity
64 MBRAM/ROM capacity
384 KBPacket buffer size
< 4.9 µs (64-byte packets)Latency (100 Mb)
< 2.6 µs (64-byte packets)Latency (1000 Mb)
6.5 million pps (64-byte packets)Throughput
8.8 GbpsSwitching capacity
8000 entriesMAC address table size
68 BTU/hrMaximum heat dissipation
100-127 VAC/200-240 VACVoltage
0.75 A /0.4 ACurrent
20 WPower
50/60 HzFrequency
230 Specifications