HP Server Appliance 3150 - Hardware Installation Map

Getting Familiar With Your
HP VPN Server Appliance SA3150
1
Look over your Hewlett-Packert VPN Server Appliance SA3150.
Each item is specifically labeled.
Mounting Options
2
Refer to the
diagrams for
mounting the
VPN device
in a stationary
rack mount.
2 inch min. clear space (3 sides)
Top View
16.8 inches
22.0 inches
Console Port
Reset Button
Power Button
Power Indicator
Flash Card Drive
Status Drive
Mounting Brackets
Placed at Side
Screws
(4 places)
Installing the Flash Card
3
The flash card comes preinstalled in the VPN device. Before
you turn the VPN device on, make sure the flash card is fully
engaged in the device.
To reinstall the flash card:
1
Open the front panel of the device by flipping the
lid down.
2
Insert the flash card horizontally into the device,
as shown below, with the red arrow on top.
3
Close the front panel of the device by flipping the lid up.
Async0 Port
AC Cord
E1 10/100 Ethernet Interfaces
E0 10/100 Ethernet Interfaces
The plastic front panel is shipped loose. Click it into place.
FRONT
BACK
HP sa3150.qxd 2/28/01 10:03 AM Page 2