HP VPN Server Appliance sa3400/sa3450 - Hardware Installation Map

Getting Familiar With Your HP VPN
Server Appliance SA3400/SA3450
1
Look over your Hewlett-Packert VPN Server Appliance SA3400/
SA3450. Each item in the back is specifically labeled.
Mounting Options
2
Refer to the
diagrams for
mounting the
VPN device in
a stationary
rack mount.
2 inch min. clear space (3 sides)
Top View
16.75 inches
18.5 inches
Front
Mounting Brackets
Placed at Front
Screws
(8 places)
Cooling FanAC Cord
E1 10/100
Ethernet Interface
E0 10/100
Ethernet Interface
Console Port
DB-9
Async0
Async0 Port
Port Covers
Diagnostic
Lights
Installing the Flash Card
3
The flash card comes preinstalled in the VPN device.
Before you turn the VPN device on, make sure the flash
card is fully engaged in the device.
To reinstall the flash card:
1
Open the front panel of the device by twisting the
lock mechanism clockwise.
2
Insert the flash card vertically into the device, with the
label oriented to the right.
3
Close the front panel, and secure the panel by twisting
the lock mechanism counterclockwise.
Power Switch
Reset Switch
Power LED
Drive Activity LED
HP sa3400/sa3450.qxp 2/28/01 10:06 AM Page 2