User’s Guide HP HP HP HP HP vs15 LCD Monitor vs17 LCD Monitor vs19 LCD Monitor f1705 LCD Monitor f1905 LCD Monitor
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. This document contains proprietary information that is protected by copyright.
Å WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. Ä CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. ✎ Text set off in this manner indicates additional information.
Contents 1 Product Features HP LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 2 Safety and Maintenance Guidelines Important Safety Information . . . . . . . . . . Safety Precautions . . . . . . . . . . . . . . . Maintenance Guidelines . . . . . . . . . . . . . Cleaning the Monitor . . . . . . . . . . . . . . . Shipping the Monitor . . . . . . . . . . . . . . . Removing the vs Monitor Base . . . . . . Preparing the f Monitor for Shipping . . .. .. .. .. .. .. .. ... ... ... ... ... ...
Contents 4 Operating the Monitor CD Software and Utilities . . . . . . . . . . . . . . . . . . 4–1 The Information File . . . . . . . . . . . . . . . . . . . . 4–1 The Image Color Matching File . . . . . . . . . . . . 4–2 Installing INF and ICM Files . . . . . . . . . . . . . . 4–2 Installing from the CD . . . . . . . . . . . . . . . . 4–2 Downloading from the World Wide Web . . . . . . . . . . . . . . . . . . 4–3 Using the Auto-Adjustment Function . . . . . . . . . 4–3 Front Panel Components . . . . . . .
Contents B Technical Specifications HP vs LCD Monitors . . . . . . . . . . . . . . . . . . . . . . HP f LCD Monitors . . . . . . . . . . . . . . . . . . . . . . . Pre-set Video Modes . . . . . . . . . . . . . . . . . . . . . . LCD Monitor Quality and Pixel Policy . . . . . . . . . . Power Cord Set Requirements . . . . . . . . . . . . . . . B–1 B–4 B–6 B–8 B–9 C Agency Regulatory Notices Federal Communications Commission Notice. . . . . Modifications . . . . . . . . . . . . . . . . . . . . . . . . Cables.
Contents viii User’s Guide
1 Product Features HP LCD Monitor The HP LCD (liquid crystal display) Monitor has an active matrix, thin-film transistor (TFT) screen. This guide discusses five models: ❏ HP vs15 LCD Monitor, a 15-inch (38.1 cm) display ❏ HP vs17 LCD Monitor, a 17-inch (43.2 cm) display ❏ HP vs19 LCD Monitor, a 19-inch (48.3 cm) display ❏ HP f1705 LCD Monitor, a 17-inch (43.2 cm) display ❏ HP f1905 LCD Monitor, a 19-inch (48.
Product Features The flat-panel monitor features: 1–2 ■ Large diagonal viewable area display ■ 1280 × 1024 factory-set resolution, plus full-screen support for lower resolutions (HP vs15 LCD Monitor: 1024 x 768) ■ Video inputs supported: ❏ VGA analog signal ❏ DVI-D (select f monitor models only) digital signal ■ VGA cable ■ Fast response time providing better experience for gaming and graphics ■ Easy to view from a sitting or standing position, or while moving from one side of the monitor t
Product Features ■ ■ User’s Guide Compliance with the following regulated specifications: ❏ EPA Energy Star ❏ European Union CE Directives ❏ Swedish MPR II 1990 ❏ TCO Environmental Requirements CD with: ❏ Information (INF) file ❏ Image Color Matching (ICM) file ❏ Auto-adjustment pattern software ❏ Safety information ❏ TCO Environmental Requirements ❏ The User’s Guide ❏ Adobe® Acrobat® Reader 1–3
Product Features 1–4 User’s Guide
2 Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. Å WARNING: To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. The grounding plug is an important safety feature. Connect the equipment to a grounded (earthed) power outlet.
Safety and Maintenance Guidelines Safety Precautions 2–2 ■ Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of the monitor. ■ Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (Amps or A) for each device.
Safety and Maintenance Guidelines Maintenance Guidelines To enhance the performance and extend the life of your monitor: ■ Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider. ■ Adjust only those controls that are described in the operating instructions. ■ Turn your monitor off when not in use.
Safety and Maintenance Guidelines Cleaning the Monitor The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor, follow these steps: 1. Turn off the computer and the monitor. 2. Unplug your monitor from the wall outlet before cleaning. Ä CAUTION: Do not use benzene, thinner, ammonia, or any volatile substances to clean the monitor screen or cabinet. These chemicals may damage the monitor. Do not use liquid cleaners or aerosol cleaners.
Safety and Maintenance Guidelines Shipping the Monitor Keep the original packing box in a storage area. You may need it later if you move or ship your monitor. ■ When you ship the vs monitor, remove the base from the pedestal. ■ When you ship the f monitor, prepare it for shipping by folding it into position. Removing the vs Monitor Base Read the following warning and caution statements before beginning the procedure.
Safety and Maintenance Guidelines 3. Holding the panel in place, pinch inside the base 1, as shown in the following illustration, and then pull the base off the pedestal 2. 1 2 Removing the base from the vs monitor pedestal 4. Pack the base with the monitor panel. Preparing the f Monitor for Shipping Read the following warning and caution statements before beginning the procedure. Å WARNING: Before folding the monitor, turn off the monitor power, and disconnect all power, video, and audio cables.
Safety and Maintenance Guidelines To prepare the f monitor for shipping: 1. Disconnect the power, video, and audio cables from the monitor. 2. Push the panel straight down to flatten the hinge 1, as shown in the following illustration. Place the strap that came with the monitor around the base by threading it through the hinge 2. Rotate the front of the panel down to a horizontal position 3. Avoid applying pressure to the LCD screen, doing so can cause damage.
Safety and Maintenance Guidelines 2–8 User’s Guide
3 Setting Up the Monitor Before You Begin 1. Unpack the monitor. Make sure all contents are included. Store the boxes. 2. Turn off the computer, and other attached devices. 3. Determine the video cable or cables that you will connect from the computer video card outputs to the VGA and DVI-D (select f monitors only) inputs on the monitor. The vs monitor supports only VGA. For the f monitor, you can connect one or both cables. ❏ VGA cable: Standard VGA 15-pin cable.
Setting Up the Monitor Installing the Monitor You can install the monitor on a desktop or wall mount. Place the monitor in a convenient, well-ventilated location near your computer. If the monitor will be installed on a: ■ Desktop or table, see “Placing the Monitor on a Desktop” for your monitor type. ■ Wall, swing arm, or other mounting fixture, see “Wall-Mounting the Monitor” for your monitor type. Instructions are specific for each type of monitor; refer to the section for your type of monitor.
Setting Up the Monitor 2. Pick up the panel with the back toward you and lower the pedestal onto the base, as shown in the following illustration, until the base locks. Inserting the vs monitor onto the base 3. Stand the monitor in the upright position on a desktop or table.
Setting Up the Monitor 4. Tilt the monitor for proper viewing. Do not tilt the monitor beyond its easily adjustable position. –5º 30º Adjusting the vs monitor tilt Wall-Mounting the vs Monitor Before you mount the monitor on a wall, a swing arm, or other mounting fixture, you must remove the monitor base and the pedestal. You will need a Phillips-head screwdriver. Read the following warning and caution statements before beginning the procedure.
Setting Up the Monitor Ä CAUTION: The screen is fragile. Placing the monitor screen down on a flat, soft area prevents scratches, defacing, or breakage. 2. Remove the hinge cover 1 as shown in the following illustration, and set it aside. Three screws and the hinge are exposed. 3. Holding the pedestal so it cannot fall, use a magnetic screwdriver to remove the single screw close to the hinge, and then remove the other two screws 2. If necessary, move the pedestal so that all three screws are accessible.
Setting Up the Monitor 5. Save the removed items (screws, hinge cover, pedestal, and base) for future use. 6. Mount the vs monitor to a swing arm or other mounting fixture. The four threaded mounting holes on the back of the panel, located around the HP logo, are compliant with the VESA standard for mounting flat-panel monitors. The vs15 Monitor uses the 75 mm spacing standard, while the other vs Monitors use the 100 mm spacing standard. Use the four holes to attach a swing arm or other mounting fixture.
Setting Up the Monitor Placing the f Monitor on a Desktop To place the f monitor on a desktop or table, you must unfold the monitor. To place the f monitor on a desktop or table: 1. Set the monitor on a flat surface. 2. Hold the base of the monitor and lift up the panel at the top 1, as shown in the following illustration. 3. Continue to lift the panel 2 to its easily adjustable position 3. 1 2 3 Opening the f monitor 4. Stand the monitor in the upright position on a desktop or table.
Setting Up the Monitor 5. Tilt the monitor for proper viewing. Do not tilt the monitor beyond its easily adjustable position. –5º 35º Adjusting the f monitor tilt Å 3–8 WARNING: Tilt the monitor carefully. If you tilt the monitor back more than 35 degrees, beyond its easily adjustable position, it can fall over. Position the monitor so that it cannot fall off the table if bumped.
Setting Up the Monitor You can adjust the f monitor so that the panel is fully forward and the bottom of the panel is nearly on the desktop, as shown in the following illustration. Adjusting the f monitor fully forward 6. Assemble the speakers. Refer to “Assembling the f Monitor Satellite Speakers” in this chapter.
Setting Up the Monitor Wall-Mounting the f Monitor Before you mount the monitor on a wall, a swing arm, or other mounting fixture, you must remove the monitor back cover and the monitor pedestal-base assembly. You will need a Phillips-head screwdriver. Read the following warning and caution statements before beginning the procedure. Å WARNING: Ensure that the monitor is lying flat, with the screen down.
Setting Up the Monitor 2. Pull up on the bottom edge and remove the rectangular back cover 1 as shown in the following illustration. Set the back cover aside. Four screws are exposed. 1 2 3 Wall-mounting the f monitor 3. Holding the pedestal-base assembly so it cannot fall, remove the four screws 2. Use a Phillips-head screwdriver. Lift the assembly 3 and set it aside.
Setting Up the Monitor 4. Save the removed items (screws, back cover, and pedestal-base assembly) for future use. 5. Mount the f monitor to a swing arm or other mounting fixture. 6. The four threaded mounting holes on the monitor panel are spaced 100 mm apart and are compliant with the VESA standard for mounting flat-panel monitors. 7. Use the four holes to attach a swing arm or other mounting fixture.
Setting Up the Monitor Assembling the f Monitor Satellite Speakers To assemble the two satellite speakers for the f monitor: 1. Invert each speaker as shown in the following illustration. 2 1 2. Hold a speaker base inverted over the inverted speaker. With the opening in the base toward the back of the speaker, match the speaker center tab 1 with the base key slot 2, and then lower the base onto the speaker.
Setting Up the Monitor Connecting the Monitor Connecting the monitor includes steps for: ■ Connecting the video input cable to the computer by using a VGA cable or a DVI-D cable (DVI-D connector on select f monitor models only; DVI-D cable sold separately). can connect the VGA cable, the DVI-D cable, or both. Only ✎ You one cable is connected for typical installations. ■ Connecting the audio cable.
Setting Up the Monitor 7 5 3 1 Connecting cables on the vs monitor Item Description 1 VGA connector and VGA cable 3 Audio connector and audio cable 5 AC Power connector and power cord 7 Security lock slot for a Kensington security lock cable (sold separately) User’s Guide 3–15
Setting Up the Monitor 7 6 4 5 1 2 Connecting cables on the f monitor 3–16 Item Description 1 VGA connector and VGA cable 2 DVI-D connector (select models only) and DVI-D cable (cable sold separately) 4 DC power connector and DC power cable for speakers 5 AC Power connector and power cord 6 Cable management clasp 7 Security lock slot for a Kensington security lock cable (sold separately) User’s Guide
Setting Up the Monitor To connect the DVI-D Cable ■ Connect the DVI-D video cable (sold separately) to the f monitor (select models only) and to the video connector on the rear panel of the computer. (The DVI-D connector on the f monitor is for digital-to-digital connection only. Your computer must have a DVI-compatible graphics card installed for use with this cable.) ❏ Connect one end of the DVI-D cable to the DVI-D input connector on the monitor 2.
Setting Up the Monitor 3. If you are using an HP subwoofer, insert the subwoofer audio plug into the right speaker subwoofer connector -. 4. Connect one end of the speaker DC power cable w to the right speaker DC power connector q. Connect the other end of the cable to the DC power connector 4 on the f monitor. 5. As needed, connect headphones to the headphone jack connector (not shown) on the right speaker.
Setting Up the Monitor Item Description 3 Speaker audio cable at computer connector 4 Speaker DC power connector and DC power cable w (connects to right speaker DC power q connector) 8 Right speaker with Control knob 9, and connectors for subwoofer - and speaker DC power q Not shown Headphone connector (right speaker) Connecting the Power Cable 1. Read the warning below. Å WARNING: To reduce the risk of electric shock or damage to your equipment: Do not disable the power cord grounding plug.
Setting Up the Monitor 4. Apply power to the monitor, the computer and other attached devices. For the f monitor, turn the satellite speakers on and adjust volume by turning the Control knob 9 on the right speaker. 5. The Monitor Status displays a message: ❏ VGA Input: Active or No Input Signal ❏ DVI Input: Active or No Input Signal (select f monitor models only) ❏ Mode: Settings 6. Adjust the monitor as needed for your comfort. Tilt the monitor for proper viewing.
4 Operating the Monitor CD Software and Utilities The CD included with this monitor contains two files you can install on your computer: ■ An INF (information) file ■ An ICM (Image Color Matching) file This CD also contains the auto-adjustment utility. This single pattern program helps improve the picture quality of your VGA monitor. See “Using the Auto-Adjustment Function” in this chapter. Adobe Acrobat Reader is supplied on the CD and can be installed from the menu.
Operating the Monitor The Image Color Matching File The ICM files provide more accurate color representation by supplying data to graphics programs to provide consistent color matching from monitor screen to printer, or from scanner to the monitor screen. The ICM files contain a monitor color system profile. These files are activated from within graphics programs that support this feature.
Operating the Monitor Downloading from the World Wide Web To download the latest version of INF and ICM files from the HP Support Web site: 1. Refer to: http://www.hp.com/support Select your country/region. 2. Follow the links for your monitor to the support page. 3. Ensure your system meets the requirements. 4. Download the software by following the instructions.
Operating the Monitor To use the auto-adjustment feature: 1. Allow the monitor to warm up for 20 minutes before adjusting. 2. Press the Auto/Select button on the monitor front panel. ❏ You can also press the Menu button, then select Auto-Adjustment from the OSD Main Menu. See “Adjusting Monitor Settings” in this chapter. ❏ If the result is not satisfactory, continue with the procedure. 3. Insert the CD in your computer’s CD-drive. The CD menu launches. 4. Select Open Auto-Adjustment Software. 5.
Operating the Monitor Front Panel Components The monitor buttons are located on the side of the front panel.
Operating the Monitor A B C D E Front panel buttons on the f monitor 4–6 User’s Guide
Operating the Monitor ‘ Item Control Function A Menu OSD Menu Active OSD Inactive (Onscreen Display) Button closes OSD. Button opens OSD. (Also closes setting screens on OSD menu.) B vs monitor: /+ (Vol up/Plus) f monitor: /+ (VGA/Plus) C vs monitor: /– (Vol down/Minus) f monitor: OSD Menu Active Button navigates up or right browse, and adjusts settings up. OSD Inactive vs monitor: Button increases the volume level of the monitor speakers. f monitor: Button selects the VGA video input.
Operating the Monitor Using the Onscreen Display 1. If the monitor is not already on, press the Power switch (E) to turn on the monitor. 2. To access the OSD menu, press the Menu button (A). The OSD Main Menu displays. Main Menu Brightness Contrast Auto-Adjustment* Volume** Advanced Menu Exit *Auto-Adjustment appears for VGA connections only. **Volume appears for the vs monitors only. 3. To access the Advanced OSD menu, press the Menu button again. The OSD Advanced menu displays.
Operating the Monitor the buttons remain untouched for 30 seconds (factory default) ✎ Ifwhile displaying a menu, new adjustments and settings, except for brightness and contrast, revert to previous settings, and then the menu closes. Adjusting Monitor Settings The screen adjustments are set in the OSD menus. Two OSD menus are available: ■ Main ■ Advanced Main Menu To access the Main Menu, press the Menu button on the monitor. The Main Menu Level 1 displays.
Operating the Monitor Advanced Menu OSD To access the Advanced Menu, press the Menu button again (twice), or select Advanced Menu from the Main Menu. The Advanced Menu Level 1 displays. selecting the Advanced Menu from the Main Menu, the ✎ After Advanced Menu remains the default OSD on subsequent power-ups of the monitor until the Main Menu is selected or factory reset is applied. The Advanced Menu OSD has up to three levels and can be viewed in one of the available languages.
Operating the Monitor Advanced Menu OSD (Continued) Level 1 Language Level 2 Level 3 Factory Pre-set Deutsch Simplified Chinese English English Español Français Italiano Nederlands Cancel Save and Return Management Power Saver On/Off Selection On Power On Recall On/Off Selection On Mode Display On/Off Selection Off Power On Status Display On/Off Selection On Sleep Timer Timer Set Menu Off Default Video Input (select f monitor models only) • Analog: VGA DVI • Digital: DVI Main (Basi
Operating the Monitor Advanced Menu OSD (Continued) Level 1 Information Level 2 Level 3 Factory Pre-set Current Settings Recommended Settings Serial Number Total Hours Backlight Hours Exit Factory Reset Yes No Exit 4–12 User’s Guide
Operating the Monitor Selecting the Video Input Connectors The two input connectors are: ■ VGA connector (analog) ■ DVI-D connector (digital) (f monitor, select models only) The monitor automatically determines which inputs have valid video signals and displays the image. The video input can be manually selected through the OSD feature or selected using the monitor buttons by pressing the – (Minus) button for DVI input or the + (Plus) button for VGA input.
Operating the Monitor Identifying Monitor Conditions Special messages display on the monitor screen for the following monitor conditions: 4–14 ■ Input Signal Out of Range — Indicates the monitor does not support the video input signal because the resolution or refresh rate are set higher than the monitor supports. Set the resolution and refresh rate to the value displayed. Restart your computer for the new settings to take effect.
Operating the Monitor Adjusting Screen Quality The auto-adjustment feature automatically fine-tunes the image quality for display size, position, clock, and phase each time a new video mode is displayed. For more precise adjustments of VGA input, run the Auto-Adjustment software on the CD. See “Using the Auto-Adjustment Function” in this chapter. If additional image quality improvement is desired, use the Clock and Phase controls of the monitor to fine-tune the image.
Operating the Monitor Entering User Modes The video controller signal may occasionally require a custom user mode if you are not using a standard graphics adapter or pre-set mode. In this condition, you may need to create a user mode. You can use the OSD to: ■ Create a user-defined mode with custom monitor screen parameters. ■ Readjust the parameters of any user mode. ■ Save them in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a pre-set mode.
Operating the Monitor Power-Saver Feature When the monitor is in normal operating mode, the Power light is blue and the monitor uses the normal watts of power. For power usage, refer to “Technical Specifications” (Appendix B). The monitor also supports a power-saver mode that is controlled by the computer. When the monitor is in the reduced power state, the monitor screen is blank, the backlight is off, and the Power light is amber. The monitor uses minimum power.
Operating the Monitor 4–18 User’s Guide
A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power switch is turned off. Turn on the power. Video cable is improperly connected. Connect the video cable properly. See “Setting Up the Monitor” (Chapter 3) for more information. Screen blanking utility is active.
Troubleshooting Problem Possible Cause Solution Image is not centered. Position may need adjustment. Press the Menu button to access the OSD menu. Select Image Control/ Horizontal Position or Vertical Position to adjust the horizontal or vertical position of the image. “No Connection, Check Signal Cable” displays on screen. Monitor video cable is disconnected.
Troubleshooting Using the World Wide Web Before contacting customer service, refer to the HP Technical Support at: http://www.hp.com/support Select your country/region, and then follow the links to the support page for your monitor. Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. For technical support contact information, refer to the printed documentation included with the monitor.
Troubleshooting A–4 User’s Guide
B Technical Specifications All specifications represent the typical specifications provided by HP’s component manufacturers; actual performance may vary either higher or lower. HP vs LCD Monitors HP vs LCD Monitor Display Type TFT LCD Active Matrix HP vs15: 15.0 in. HP vs17: 17.0 in. HP vs19: 19.0 in. 38.1 cm 43.2 cm 48.3 cm HP vs15: 15.0-in. diagonal HP vs17: 17.0-in. diagonal HP vs19: 19.0-in. diagonal 38.1 cm 43.2 cm 48.
Technical Specifications HP vs LCD Monitor (Continued) Dimensions (including base) HP vs15: HP vs17: HP vs19: Height x Width x Depth 13.6 x 13.7 x 7.5 in. 15.4 x 15.0 x 8.1 in. 16.7 x 16.8 x 8.1 in. Height x Width x Depth 345 x 347 x 189 mm 391 x 381 x 204 mm 424 x 426 x 204 mm Maximum Graphics Resolution HP vs15: 1024 x 768 (75 Hz) analog mode HP vs17: 1280 x 1024 (75 Hz) analog mode HP vs19: 1280 x 1024 (75 Hz) analog mode Text Mode 720 x 400 Dot Pitch HP vs15: 0.297 x 0.297 mm HP vs17: 0.264 x 0.
Technical Specifications HP vs LCD Monitor (Continued) Power Consumption HP vs15: <32 watts typical HP vs17: <45 watts typical HP vs19: <45 watts typical Sleep Power Consumption HP vs15: <2 watts typical HP vs17: <2 watts typical HP vs19: <2 watts typical Input Terminals User’s Guide VGA 15-pin D-type connector B–3
Technical Specifications HP f LCD Monitors HP f LCD Monitor Display Type TFT LCD Active Matrix HP f1705: 17.0 in. HP f1905: 19.0 in. 43.2 cm 48.3 cm HP f1705: 17.0-in. diagonal HP f1905: 19.0-in. diagonal 43.2 cm 48.3 cm Viewable Image Size Tilt –5o to 35o Face Treatment Antiglare polarizer with hard coating (select models only) Maximum Weight (unpacked) HP f1705: 13 lbs. HP f1905: 15.4 lbs. 5.9 kg 7.0 kg Dimensions (including base) Height x Width x Depth Height x Width x Depth f1705: 17.
Technical Specifications HP f LCD Monitor (Continued) Vertical Refresh Rate (analog mode) 50 to 76 Hz Environmental Requirements Temperature: Operating Temperature Non-operating Temperature 41 to 95o F –4 to 140o F Relative Humidity 20% to 80% Power Source 100–240V , 50/60 Hz Power Consumption <70 watts typical Sleep Power Consumption <2 watts typical Input Terminals VGA 15-pin D-type connector DVI-D connector (select models only) User’s Guide 5 to 35o C –20 to 60o C DVI-D cable sold separa
Technical Specifications Pre-set Video Modes This monitor automatically recognizes many pre-set video input modes that will appear properly sized and centered on the screen.
Technical Specifications Factory Pre-set Video Input Modes (Continued) Pre-set Pixel Format Horizontal Frequency (kHz) Vertical Frequency (Hz) 12* 1152 x 870 68.7 75.6 13* 1152 x 900 71.7 76.0 14* 1280 x 1024 63.9 60.0 15* 1280 x 1024 80.0 75.0 *Pre-set not supported for HP vs15 monitor.
Technical Specifications LCD Monitor Quality and Pixel Policy The HP LCD Monitor uses high-precision technology, manufactured according to high standards, to guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the HP LCD Monitor. These imperfections are caused by one or more defective pixels or subpixels.
Technical Specifications Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100–120V or 200–240V . The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country/region where you purchased the equipment.
Technical Specifications B–10 User’s Guide
C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Agency Regulatory Notices Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC rules and regulations.
Agency Regulatory Notices Materials Disposal This HP product contains the following materials that might require special handling at end-of-life: ■ Mercury in the fluorescent lamp in the display LCD. ■ Lead in the solder and some component leads. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (EIA) (http://www.eiae.org).
Agency Regulatory Notices European Union Regulatory Notice This product complies with the following EU Directives: ■ Low Voltage Directive 73/23/EEC ■ EMC Directive 89/336/EEC Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family.
Agency Regulatory Notices Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Agency Regulatory Notices Japanese Power Cord Notice Korean Notice EPA Energy Star Compliance Products marked with the ENERGY STAR® logo on the packaging box qualify with the U.S. Environmental Protection Agency’s ENERGY STAR® guidelines for energy efficiency. Products with the ENERGY STAR® label are designed to use less energy, help you save money on utility bills, and help protect the environment. ENERGY STAR® is a registered trademark owned by the U.S. government.
Agency Regulatory Notices HP Recycling Program HP offers product end-of-life return programs for HP and other manufacturers’ hardware in several geographic areas. The terms and availability of these programs vary by geography because of differences in regulatory requirements and local customer demand. For information on the HP recycling program, refer to the HP Web site at: http://www.hp.
Part Number: 406079-A21
