HP Cache Server Appliance Administrator Guide

93
Chapter 11 Security Options
3. Edit the following variables:
4. Save and close the
records.config file.
5. Open the
ldapsrvr.config file with Vi.
6. Add bypass sites to the
ldapsrvr.config file.
For information about the format of the
ldapsrvr.config file, refer to page 169.
7. Save and close the
ldapsrvr.config file.
8. Restart Traffic Server using the command
start_traffic_server
Using SSL Termination
Traffic Server’s SSL termination option enables you to secure connections in reverse proxy mode between a
client and a Traffic Server and/or Traffic Server and an origin server.
The following sections describe how to enable and configure the SSL termination option:
• To enable and configure SSL termination for client/Traffic Server connections, follow the procedures in
‘Client and Traffic Server connections,” below.
• To enable and configure SSL termination for Traffic Server/origin server connections, refer to Traffic
Server and origin server connections‚ on page 96.
• To enable and configure SSL termination for both client/Traffic Server and Traffic Server/origin server
connections, follow the procedures in both ‘Client and Traffic Server connections,” below, and Traffic
Server and origin server connections‚ on page 96.
Variable Description
proxy.config.ldap.auth.bypass.enabled Set this variable to 1 to enable LDAP
authentication bypass.
proxy.config.ldap.auth.multiple.ldap_servers.enabled Set this variable to 1 to allow the sites
specified in the ldapsrvr.config file to
bypass authentication.